Number Plate Drilling Guides
$ 3.60
- DescriptionHow to Install Number Plates – No Measuring, No Mess!Looking for the easiest way to install your new number plates from the Number Plate Hub? Say goodbye to rulers and measuring tape! With our Drill Guides, you can perfectly align and secure your plates without the hassle. Just stick the Drill Guides onto your vehicle’s existing screw points, press your plate against them, and pull it away. The result? Perfectly positioned guides on the back of your plate, ready for drilling.Step-by-Step Guide: How to Install Number Plateshttp://numberplatehub.co.uk/wp-content/uploads/2024/12/Drill-Guide-Video-for-Website.mp4 Remove Old Plates Take off your existing number plates from the vehicle.Clean the Area Ensure the screw points and surrounding area on your car are clean and free of dirt or debris.Position the Drill Guides Place a Drill Guide over each screw point on your car, making sure the screw point is centered within the guide.Align the Plate Press your number plate onto the Drill Guides, keeping it level. Made a mistake? No problem! We provide 10 Drill Guides, so you can easily try again.Transfer and Drill Pull the plate off your car to reveal the Drill Guides now perfectly positioned on the back of the plate. Use a 6mm drill bit to drill through the center of each guide.Remove the Guides Once the holes are drilled, peel off the Drill Guides from the back of the plate.Attach the Plate Push screws with your chosen colored caps through the new holes, securing the plate to the screw points on your vehicle.Make Number Plate Installation Easy!Now you know how to install number plates effortlessly. Step back and admire your perfectly aligned plates—it’s that simple! With our Drill Guides, you can achieve professional results without any measuring or mess.Ready to install your number plates the easy way? Get your Drill Guides today!
