IWIN-U600 Ultrasonic flaw detector can quickly, non-destructively and accurately detect various defects (cracks, inclusions, blowhole, etc.) inside the workpiece. The product is unique in design, easy to operate and durable. Product specifications Examination range Working frequency Sound speed range Dynamic Range Vertical linearity error Horizontal linearity error Discrimination Sensitivity margin Digital suppression Electrical noise level Probe type Gate Pulse amplitude Pulse Width Probe damping Real-time sampling of hardware Detection method Filter band Data storage Communication Interface power supply Dimensions Ambient temperature and humidity IWIN-U600 full digital ultrasonic flaw detector (0~9999)mm (0.2~20)MHz (1000~15000) m/s ≥36dB ≤2.5% ≤0.1% >40dB(5P14) >65dB (deep 200mm Ф 2 flat bottom hole) (0~80)%, does not affect linearity and gain ≤8% Straight probe, oblique probe, dual crystal probe, penetration probe Incoming gate, loss gate; single gate reading, double gate reading Low (300V), medium (500V), high (700V) grading options Continuous adjustment in the range of (0.1~0.5)μs to match probes of different frequencies 100Ω, 200Ω, 400Ω optional High resolution 10-bit AD converter with sampling speed of 160MHz and high waveform fidelity Positive half wave, negative half wave, full wave, radio frequency detection (0.2~20)MHz, fully automatic matching according to probe frequency, no need to set manually 100 sets of flaw detection parameter channels, 1000 flaw detection echo signals and parameters USB2.0 high speed communication transmission interface DC (DC) 9V; lithium battery works continuously for more than 8 hours 263×170×61 (mm) Temperature: (-10~50) °C Humidity: (20~95)%RH
